2 tiers.
$21Two favorites. One focused display.
Includes one 2-tier stand.
NASCAR Diecast Display Stand
4 tier / 1 stand / Black
$29.00
Skip to product information
1:24 NASCAR diecast display stand
Your collection.
Your collection.
Front row.
The race wins. The favorite drivers. The paint schemes you had to have. Give them a display of their own.
Choose one stand or a three-pack below.
Diecast cars are not included.
$29.00
Pickup currently not available
Typically ships in about 2 daysEstimated dispatch. Delivery time varies by destination.
Returns accepted in new conditionBuyer pays return shipping. Contact us before returning.
3D-printed PLA · Indoor display
Cars and mounting screws are not included.
Made for the collection. For 1:24 NASCAR diecast.
Your starting lineup. Choose 2, 3 or 4 tiers.
Show your colors. Black, Red or Racing Blue.
Check the fit
Know where your wheels will sit.
Two recessed channels support the front and rear wheels. Each channel runs across the car, with room for the left and right tires on one axle.
- Usable length along each wheel channel
- 3⅜ in / 85.7 mm
- Check the span across your car’s left and right tires. Both tires must sit within the channel’s usable length.
- Front-to-rear wheel support centers
- 4.547 in / 115.49 mm
- The distance between channel centers. Compare it with your car’s front-to-rear wheelbase.
- Clear opening across one curved channel
- 0.675 in / 17.15 mm
- Measured across the trough opening in the tire’s rolling direction. The curved opening narrows below its top edges.
These are nominal dimensions from the stand’s design file. Printed dimensions can vary slightly. Scale alone does not guarantee fit; compare your car’s wheel positions and body clearance before ordering.
Measure across the car.
Check the outside span of the left and right tires against the channel length.
Check your wheelbase.
Compare front-to-rear wheel centers with the 4.547 in support spacing.
Allow room for the body.
Check your car’s height, spoiler and underside against the tier spacing below.
Support you can see
More than a place to park.
Made to display your diecast at the wheels, with the paint scheme out in front.
- Braced beneath each level.Diagonal supports connect the projecting rails to the rear frame.
- Recessed wheel channels.Curved channels and raised edges give the tires a defined place to rest.
- 3D printed in PLA.A rigid printed frame with visible layer texture, made for an indoor collection.
Shown with real 1:24 NASCAR diecast cars. One car per level, resting on its tires.
Your collection. Your grid.
Build your starting lineup.
Put a favorite pair together, group a team, or give four paint schemes their own row. One car per tier.
3 tiers.
$25A team, a season, a favorite trio.
Includes one 3-tier stand.
The full four-car lineup4 tiers.
$29Four paint schemes, stacked in view.
Includes one 4-tier stand.
For a growing garage
Three stands.
Twelve spots on the grid.
The 3-pack includes three separate 4-tier stands. Arrange them together or give each group its own space.
$75$87 when bought separately
Save $12 on three 4-tier stands.
See the 4-tier 3-pack options ↑
Save $12 on three 4-tier stands.
A 3-pack means three stands, each with four tiers. Cars are not included.
Match your collection
The cars bring the color.
So can the stand.
Keep the frame understated in Black, bring the energy in Red, or build around Racing Blue.
Have another color in mind? Ask us about a custom color before ordering.
Make room for the lineup
Small footprint.
Four levels of display.
9.2″ H × 5.375″ W × 4.294″ D
233.68 × 136.53 × 109.07 mm
Dimensions are for the bare 4-tier stand. Your cars extend beyond the stand and need additional room.
- About 2.6 in between levels
- Matching wheel-channel points rise 2.614–2.628 in (66.39–66.76 mm) from one level to the next.
- Open-front vertical gap
- 2.456–2.471 in (62.38–62.75 mm), from the lower channel valley to the underside of the next rail. Rear braces reduce the available clearance toward the back.
- Check the whole car
- The gap is not a maximum car-height rating. Allow space for roofs, spoilers, body overhangs and the rear supports.
Measurements above come from the 4-tier design. Contact us for exact 2- or 3-tier overall dimensions.
A closer look at mounting
Two mounting holes. Built into the frame.
The upper rear crossbar has two round through-holes, spaced 1.875 in (47.63 mm) center to center.
Screws and wall anchors are not included.
Choose fasteners suitable for your wall and the total weight of the loaded display. The photos also show the stand resting on a level surface.
Before the green flag
The details collectors ask for.
Fit, size, colors and what arrives in the box.
Still have a question? Contact us →Will it fit my diecast cars?
The stand is made for 1:24 NASCAR diecast. Check the fit guide against your specific car: 3⅜ in of usable channel length across the car, 4.547 in between front and rear channel centers, and a 0.675 in clear channel opening. Also check body and spoiler clearance. Scale alone does not guarantee every model will fit.
How strong is the stand?
Each level has diagonal braces beneath the wheel-support rails, and the frame is 3D printed in rigid PLA. The product photos show it supporting the displayed diecast cars. There is no tested maximum weight rating; if you have an unusually heavy model, ask us before ordering.
How much space is there between tiers?
On the 4-tier design, matching wheel-channel points are approximately 2.6 in apart vertically. The open-front gap to the underside of the rail above is approximately 2.46–2.47 in. Diagonal braces reduce clearance toward the rear, so this is not a uniform roof-clearance measurement. See the full spacing details.
Do I receive one stand or three?
Choose one 2-tier stand for $21, one 3-tier stand for $25, or one 4-tier stand for $29. The $75 3-pack includes three separate 4-tier stands, with space for twelve cars in total. Tier count and pack quantity are listed separately in the product options.
Are the cars included?
No. This listing is for the display stand or selected stand pack. All diecast cars and room accessories are shown for display only.
Can I choose another color?
Black, Red and Racing Blue are the standard color options. Other colors can be made by request. Contact us with your preferred color before ordering so we can confirm the available material and timing.
Can I mount it to a wall?
The upper rear crossbar includes two round screw holes spaced 1.875 in center to center. Screws and wall anchors are not included. Select mounting hardware suited to your wall and the weight of the loaded display.
What is it made from?
The stand is 3D printed in PLA. Fine layer lines are part of the printed finish. Keep it indoors and away from high heat, such as a hot vehicle or a heater.
When will my order ship?
Orders typically ship in about 2 days. This is an estimated dispatch time; delivery time depends on your destination and shipping service. Custom colors or larger orders may require additional time, which we can confirm before you order.
Can I return it?
Returns can be accepted when the stand is in new condition. The buyer pays return shipping. Contact us to arrange a return before sending it back.
Give your collection the front row
Pick your lineup.
Make it a display.
2, 3 or 4 tiers. Three standard colors. Cars not included.
Purposeful Brands · 3D printed diecast displays